After reading the news on the 16 special edition 40h's being released,
I'm really interested in seeing the case it comes with.

I've been trying to find a good case for my 40h but can't find a good
solution.

some people use this case:

http://www.sfbags.com/products/macminicase/macminicase.htm



a pelican 1300 hard case w/ removable foam fits it...



I'm currently using a portable dvd player bag. its a little bigger than 
i wanted...its about an inch too wide, but it works (and was cheap - $10 
from a local retailer)

DIY-it!  ...got an old pair of pants that don't fit?  Cut off part of a 
pant-leg, turn it inside-out and sew the cut end shut (cut it 1/2 again 
longer than the monome so you can fold it over), turn it right-side in 
again and you're done.  If you want to get fancy add some velcro or a 
big coat button - add some foam inside for padding - or a paisley lining 
if so inclined, and voila, yer own kustom monome case - FREE!  I got 
this idea from MAKE magazine.  Make 2 monome bags and you'll have a nice 
pair of Daisy Dukes leftover.  You don't have to sew very well since the 
stitches are inside.

i don't even use a case!

I believe the OP is asking about a shell to mount the electronics in. 
The monomes posted the shape of the top panel, but the sides, bottom and 
USB hole are the final unknowns.

I thought he was referring to the "hand-felted wool case" that will come 
with the 40h Special Editions.

I'm referring to a case to put the 40h in.

when travelling, mine usually site on top of my laptop in my laptop bag. 
not ideal.

im working on a simple pattern for a case… im talking dead simple. if it 
works out ill post it up here.