10 left. we're need to keep a reasonable overstock for potential repairs
(we haven't had to do any yet.) 30 more might become available in about
6 months.

we're planning on open-sourcing the actual eagle and gerber files when
we get closer to selling the remaining 40h units. timing is tricky.

Would like one.


> 10 left. we're need to keep a reasonable overstock for potential repairs
> (we haven't had to do any yet.) 30 more might become available in about
> 6 months.
> 
> we're planning on open-sourcing the actual eagle and gerber files when
> we get closer to selling the remaining 40h units. timing is tricky.

michael dukeman wrote:
> Would like one.

e-mail orders@monome.org with your address.

7 remain

2 remain.


we might have more left when the remaining 40h units are out the door.

also the schem is posted if you'd rather wire you own of course.

Are there any left???



tehn wrote:
> 2 remain.

Also, do you guys sell the LED boards?  I have only found 4X4.




Jack wrote:
> Are there any left???
> 
> 
> 
> tehn wrote:
>> 2 remain.

Where do you guys get the 8x8 pcb grid?  I also sent an email to 
orders@monome.org showing interest in an order.



Jack wrote:
> Also, do you guys sell the LED boards?  I have only found 4X4.
> 
> 
> 
> 
> Jack wrote:
>> Are there any left???
>> 
>> 
>> 
>> tehn wrote:
>>> 2 remain.

Jack wrote:
> Where do you guys get the 8x8 pcb grid?

we make them, but we don't have any overstock. we might have a few left 
in a couple months.

we'll be posting full board layouts soon.

also:

1 logic board left.

more might be available later.

Hi, my name is chris and i am from the uk, dj and production is my game, 
really interested in your logic board for a custom controller for 
ableton, any info would be very much appreciated!

Chris

coldrush wrote:
> Hi, my name is chris and i am from the uk, dj and production is my game, 
> really interested in your logic board for a custom controller for 
> ableton, any info would be very much appreciated!
> 
> Chris

have you done any custom controller development before? there's quite a 
lot of info on the wiki:

http://wiki.monome.org/view/40hLogicBoardCustomProjects

tehn wrote:
> Jack wrote:
>> Where do you guys get the 8x8 pcb grid?
> 
> we make them, but we don't have any overstock. we might have a few left 
> in a couple months.
> 
> we'll be posting full board layouts soon.


Any chance you have any 8x8 pcb grids available yet??  I got my logic 
board!!

tehn wrote:
> 10 left. we're need to keep a reasonable overstock for potential repairs
> (we haven't had to do any yet.) 30 more might become available in about
> 6 months.
> 
> we're planning on open-sourcing the actual eagle and gerber files when
> we get closer to selling the remaining 40h units. timing is tricky.


If you still have any I would love to get one?

Let me know, I love your project and granted if your stock is down let 
me know when you guys restock

Thanks.
Evan.

> If you still have any I would love to get one?

we have to check the remaining stock. we'll need to keep a few here in 
case of repairs, but i think we still might have some overstock. i'll 
post here in the next couple days.

tehn wrote:
>> If you still have any I would love to get one?
> 
> we have to check the remaining stock. we'll need to keep a few here in 
> case of repairs, but i think we still might have some overstock. i'll 
> post here in the next couple days.

Thanks!

whitenoise wrote:
> tehn wrote:
>>> If you still have any I would love to get one?
>> 
>> we have to check the remaining stock. we'll need to keep a few here in 
>> case of repairs, but i think we still might have some overstock. i'll 
>> post here in the next couple days.
> 
> Thanks!

If you manage to scrounge another one up. I'd love one!

tehn wrote:
> 10 left. we're need to keep a reasonable overstock for potential repairs
> (we haven't had to do any yet.) 30 more might become available in about
> 6 months.
> 
> we're planning on open-sourcing the actual eagle and gerber files when
> we get closer to selling the remaining 40h units. timing is tricky.

I am also very interested in buying one, as well as any buttons and pads 
you have available.  I have the equipment to laser cut my own enclosure 
so I would really like to give it a try.

Evan Morris wrote:
> If you still have any I would love to get one?
> 
> Let me know, I love your project and granted if your stock is down let 
> me know when you guys restock
> 
> Thanks.
> Evan.

hello evan, cool to see you over here!

kid-sputnik wrote:
> Evan Morris wrote:
>> If you still have any I would love to get one?
>> 
>> Let me know, I love your project and granted if your stock is down let 
>> me know when you guys restock
>> 
>> Thanks.
>> Evan.
> 
> hello evan, cool to see you over here!

Thanks!

I love a warm hello.

Hi,
I'm also interested in a logic board, though I haven't seen a price. 
Hope you can let me know if you have any available.
Thanks.

we might have a few left, they won't be available for several weeks.

$86 includes shipping.

Just let me know when they are ready. I'd like to buy a couple of them.

Thanks.

Evan

Yes, me also.  The project I've already built in my mind is very much 
excited about the availablility of these boards.

Is there any idea of an estimated range of what may be available?

It seems there is a LOT of interest in them.

unfortunately the interest is just over what we have available (plus 
want to keep for ourselves) which makes it very problematic.

if it was greater, we'd have no problem producing more board for people. 
but since it's such a small number, the cost ends up being substantial.

also right now we're behind on filling 40h orders, so there are 
definitely no assembled boards ready to go.

when we catch up and decide how many logic boards we can let go, we'll 
try to service previous requests for logic boards.

so e-mail us to get into this list, but be patient that it may be some 
time.

has anyone considered wiring their own? the schematic is on the wiki. a 
ton of work, but definitely eye-opening.

cheers, and thanks for your patience.